Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Dundee
If a spring has snapped on your door, you’re probably stuck with a door that won’t lift or a car you can’t get out. Poinciana Garage Door Repair Co handles garage door spring repair across Dundee, from homes near the Lake Marie area to rural properties out toward Alturas. We know the ridge country between Winter Haven and Lake Wales and the kind of doors that live here: heavy carriage-house panels on detached garages, older steel doors on retiree homes, and outbuilding doors on acreage. Call (877) 471-4560. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Dundee Homeowners Call Poinciana Garage Door Repair Co for Garage Door Spring Repair
Spring work is the highest-risk task in this trade, and it’s where generalist handymen get hurt. Our technicians work on torsion and extension systems specifically, with up to 9 years of experience, and they arrive already familiar with the hardware on your door, whether it’s a Craftsman setup on a manufactured home or a Raynor system on a custom build.
We cover Dundee closely, and our response times here stay tight because we know the roads and the lots. When the door won’t move, we move fast. The local pro we connect you with is licensed and insured as their state requires, and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Dundee
Springs, cables, tracks, and openers all get handled here, so nothing about your door gets handed off to someone else. Here’s what the work looks like in Dundee.
Torsion Spring Replacement
The torsion spring is the horizontal spring above your door that does the lifting. When it breaks, the door becomes dead weight and the opener alone can’t handle it. We replace torsion springs on Dundee’s detached garages and outbuildings with properly rated units, then rebalance the door before we leave.
High-Cycle Spring Upgrade
A standard spring has a finite life, and on a heavy carriage-house or wood door it’s worked harder than most. We’ll set you up with a high-cycle torsion spring rated for 25,000 cycles or more when the door’s weight and daily use call for it. It’s the upgrade that keeps a heavy Dundee door opening smoothly for years instead of months.
Extension Spring Replacement
Older doors and many outbuilding doors use extension springs that run along the tracks. Over time those springs stretch, get corroded, and lose their lift. We match replacements to the door’s actual weight and pair them with proper safety restraint.
Safety Cable Installation
When an extension spring fails, it can fly. Safety cables run through the spring to contain it. If your Dundee door doesn’t have them, that’s a gap worth closing before a failure turns into damage.
Broken Spring Repair and Spring Adjustment
Sometimes a door just hangs unevenly or the opener strains because the spring tension is off, not because a spring is broken. We diagnose which it is, adjust or repair as needed, and check the whole assembly while we’re there.
Trusted Brands We Service in Dundee
We work on the brand already on your door, and that familiarity saves everyone time. That includes LiftMaster and Chamberlain operators and the door hardware common on Dundee homes, plus Craftsman and Raynor systems we see on older builds and shops. Whatever’s up there, the diagnosis starts from what you have, not from what we’d like to sell you. That keeps turnaround fast and recommendations honest, since we’re brand-agnostic and fit the fix to your door and budget.

Common Garage Door Spring Repair Problems We See in Dundee Homes
- Grit and gravel-drive dust fouling torsion drums. Many Dundee properties sit on long sand-and-gravel drives, and that dust works into the drums and end bearing plates. It grinds against the assembly and speeds up spring and cable wear well before cycle count alone would explain it.
- Corrosion and heat stress on extension springs and cables. Central Florida’s humid summers and frequent thunderstorms take a toll. Springs and cables corrode and weaken, so a door that felt fine in spring can fail by late summer.
- Improperly matched springs on heavy wood or carriage-house doors. A spring rated for a lighter door will fatigue fast on a heavy wood panel, and the opener ends up straining against an out-of-balance door. Matching the spring to the door’s actual weight fixes the whole problem.
- Wind-rated hardware that needs reinforcing. Dundee sits in a hurricane-wind region, so doors need proper reinforcement on the springs and hardware. When a spring fails on a reinforced door, the replacement has to keep that rating intact.
Pricing for Garage Door Spring Repair in Dundee, FL
A typical spring repair in Dundee runs $180 – $340 for one spring. A matched pair is usually replaced together, so plan on roughly twice that range when both go. Those are estimated ranges, and the written estimate we give you sets the final price.
| Service | Typical Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
What moves the number: door weight, whether it’s a high-cycle upgrade, and whether cables or drums need attention too. The price is quoted and agreed before any work starts, so there’s no surprise on the invoice. Call (877) 471-4560 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterHow a Spring Job Usually Goes in Dundee
On a rural Dundee property with a heavy wood or carriage-house sectional door, the door often starts binding because gravel-drive dust has worked into the torsion spring and drums, causing the opener to strain and the door to hang unevenly. A qualified local pro typically inspects spring cycles, cables, and end bearing plates, cleans and lubricates the torsion assembly, and replaces the torsion spring with a high-cycle unit rated for 25,000 cycles or more before rebalancing the door and checking track alignment and photo-eye sensors. That sequence is how it should go, and it’s how we approach spring work across Dundee. These springs are under high tension, so this isn’t a job to attempt yourself; a trained technician with the right tools handles the release safely.
We Also Serve Cities Near Dundee
We cover the towns around Dundee too, including Alturas, Lake Hamilton, Haines City, and Poinciana. If you’re just outside town limits on acreage or in one of the surrounding communities, we can still reach you. Call (877) 471-4560 with your address and we’ll confirm coverage and scheduling.
Serving Dundee, FL – Our Local Coverage Area
We serve Dundee and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Dundee
If the door won’t lift by hand or you heard a loud bang, it’s almost always a broken torsion spring, not an adjustment issue. An uneven or straining door with an intact spring may only need tension adjustment. A technician can tell the difference in minutes. Call (877) 471-4560 for an exact quote, and estimates are free.
Gravel-drive dust works its way into the torsion drums and end bearing plates and grinds the assembly, so springs fail from grit wear well before cycle count alone would explain it. Rural outbuilding and pole barn doors on Dundee acreage see more of this than doors in planned communities. Call (877) 471-4560 to book an inspection.
We can, but it’s usually not the smart move, because the second spring is the same age and carries the same wear. Replacing both together avoids a second job weeks later. We’ll explain the difference and let you decide. Call (877) 471-4560 for an exact quote, and estimates are free.
A high-cycle torsion spring rated for 25,000 cycles or more, matched to the door’s actual weight, is the right call for a heavy wood or carriage-house door. In Dundee’s humid, storm-prone climate, corrosion-resistant hardware matters too. Call (877) 471-4560 and we’ll size it to your door.
Once a year is a good baseline, and more often on rural properties where gravel dust accelerates wear. If your opener is straining or the door hangs unevenly, don’t wait for the annual check. Call (877) 471-4560 for a free estimate.
Call for a Free Spring Repair Estimate in Dundee
Whether your door is stuck on a rural Dundee property or straining on a carriage-house panel in town, we’ll diagnose it and quote the price before any work begins. Call (877) 471-4560. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Poinciana Garage Door Repair Co.